Final hair removal and rejuvenation device
Fusion Laser
When technology merges with elegance, beauty becomes definitive.
Advantages of the Fusion Laser permanent hair removal and rejuvenation device
1
Low failure rate, longer use time, stronger output energy, around 80J, flashing life of over 5 million times.
High-power quartz fiber made in Germany
FUSION LASER
High power quartz fiber made in Germany: Low failure rate, longer usage time.
OTHER
Polyester (plastic) coated optical fiber, which has a higher after-sales failure rate and is easily damaged at high energy.
2
The integrated molded housing and the separation of the optical path into water and electricity ensure safety in use. The dust and water resistance level can reach IP61, such a design can avoid the energy attenuation caused by environmental pollution.
Special laser cavity design
3
The treatment handle, designed and manufactured through research, accepts different spot sizes, being able to satisfy all body skin hair removal needs: professional, precise and efficient.
Supports different spot sizes
16mm
9.5mm
11mm
12mm
14mm
755nm
7.5mm
1064nm
8mm
10mm
12mm
14mm
18mm
20mm
Xenon Lamp - UK Brand
The high-quality xenon lamp made in the UK ensures better and more powerful laser energy and a longer lifespan of the device.
Laser Crystal Headbands
The diameter of the Fusion Laser crystal laser bar is 8 mm, other suppliers only have 6 mm.
Laser Drive System
-
Pulse Laser Power Supply: 2000W MAX 600V
-
Electrolytic Capacitors
(The quantity and capacity of the capacitors influence the energy stability of the output. The larger the better.)
4
The xenon lamp made in the UK, works with an 8 mm diameter laser bar, 8 sets of 22000 uF high-capacity capacitors, ensures a stable and attenuation-free 20 HZ high-frequency output energy.
High energy production
OTHER SUPPLIERS
12000uF x 8
27000uF x 4
FUSION LASER
22000uF x 8
5
Fusion Laser is equipped with an air cooling system with an infinitely variable speed of 24000 rpm, without consumables and providing a good cooling experience.
About the cooling system
Air Cooling
Fusion Laser uses a continuous speed blower to ensure continuous air exhaust, no consumables,
and a good cooling experience.
Liquid Nitrogen Cooling
The use of environmentally friendly refrigerant R134A (1,1,1,2-tetrafluoroethane) can achieve a rapid cooling effect when spraying the skin, and the skin temperature can be reduced to about -10℃ to -20℃ within the spraying range and the corresponding time, rapid cooling, good effect.
The working principle of the Fusion Laser permanent hair removal and rejuvenation device
Long-pulse lasers act on specific target tissues in the skin by emitting lasers with specific wavelengths.
Treatment principles include the following aspects:
Laser energy is absorbed by specific pigments (such as melanin) or hemoglobin in the skin and converted into thermal energy, thus destroying the target tissue.
1. Selective photothermal effect:
Long-pulse lasers can penetrate deep into the dermis, stimulate fibroblast proliferation, and promote collagen production, thereby improving skin elasticity and firmness.
2. Stimulation of collagen proliferation:
By controlling the pulse duration and laser energy, the target tissue can be precisely heated to reduce damage to surrounding healthy tissue.
3. Thermal effect:
Applications of the Fusion Laser permanent hair removal and rejuvenation device
Long-pulse lasers are widely used in medical cosmetology, mainly including the following aspects:
By stimulating collagen production, it improves skin texture and elasticity, reducing fine lines and wrinkles.
Skin Rejuvenation
Melanin is destroyed by selective photothermal action, which can remove freckles and pigment spots.
Pigmentation Removal
Long-pulse lasers can effectively destroy hair follicles and achieve a long-lasting hair removal effect.
Permanent Hair Removal
Like red spots and capillary dilation, lasers act on hemoglobin to reduce vascular dilation.
Treatment of vascular diseases of the skin
Results
Clinical surgery is convenient and can be used for:
hair removal, skin rejuvenation, freckles and vascular skin diseases.
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
Technical specifications of the Fusion Laser permanent hair removal and rejuvenation device
Certifications of Fusion Laser permanent hair removal and rejuvenation equipment
MDR (Medical Device Regulation) certification is an essential process for placing medical devices on the market in the European Union, according to Regulation (EU) 2017/745, which entered into force on May 26, 2021. This regulation replaces the old Medical Device Directive (MDD - 93/42/EEC) and introduces stricter requirements regarding the safety, performance and traceability of medical devices.
What does it mean in short?
🔹 It is proof that the product is safe, effective and of quality according to EU rules.
🔹 It is mandatory for class IIa, IIb and III medical devices that are sold or used in the EU.
What does the MDR certificate guarantee?
✅ Patient safety – the device has been rigorously tested (physical, chemical, clinical).
✅ Proven performance – there are studies or data showing that the device does exactly what it promises.
✅ Risk control – all risks have been identified and minimized.
✅ Full traceability – from manufacturer to user.
✅ Quality systems – the manufacturer has an internal quality control and audit system (QMS according to ISO 13485).
See other similar equipment
You might also be interested in...
